The test box should be cleaned of impurities inside before use, and the distribution room should also be cleaned at least once a year to maintain cleanliness inside and outside the constant temperatur

Water jacket carbon dioxide incubator refers to a material that relies on heated water inside the chamber wall to maintain a uniform temperature throughout the incubator. Due to the high thermal capac

1、 Firstly, it should be a heating tube. You can use a multimeter to adjust it to the Ohm gear and measure the resistance value at both ends of the heating tube to see if there is an open circuit or l

Mold incubator laboratory is a common laboratory equipment widely used for the cultivation, reproduction, and research of bacteria and molds. It is a closed box with controllable temperature, humidity

When using a box type resistance furnace for the first time or reusing it after long-term shutdown, it is necessary to dry the furnace in advance, otherwise it may easily cause furnace cracking.When u

1. The shell of the drying oven must be effectively grounded. After use, the power should be turned off to ensure safe use.2. The drying oven should be placed indoors with good ventilation conditions,

Artificial climate box is a specialized constant temperature and light cultivation device for the cultivation and breeding experiments of bacteria, molds, and microorganisms. It simulates natural clim

When using ultrapure water equipment, if there is minimal maintenance and upkeep, it can lead to equipment failure. So the editor of this article will talk about how to maintain ultrapure water equipm

When preparing ultrapure water, the following points should be noted:1. To produce ultra pure water, it should be prepared and used as needed to ensure the best water quality, as the water quality wil

The reasons for the decrease in water quality of ultra pure water equipment during use are as follows:1. Pretreatment filter element: Some users use raw water with poor quality, with a large amount of